Stainless steel flange block
Stainless steel flange block

The Graphalloy stainless steel flange blocks are available in 2-bolt and 4-bolt configurations in a wide range of base dimensions and can accommodate shaft diameters from 0.5" (12.7 mm) to 3.75" (92.5 mm). Graphalloy is suitable for
temperatures of 750° F and above in non-oxidizing environments or with oxidation-resistant grades.

The flange blocks deliver lifetime cost and operating advantages in high temperature ovens, low speed and stationary applications such as dampers and other hard to lubricate environments.

The Graphalloy graphite/metal alloy, is graphite impregnated with metal to enhance the chemical, mechanical and tribological properties of the material. The material, most commonly used in bushings, is available in over 100 grades and can be designed to fit a variety of machinery.