The XATS 138 compressor provides a combination of efficiency and flexibility.
The XATS 138 compressor provides a combination of efficiency and flexibility.

With the PACE (Pressure Adjusted through Cognitive Electronics) system, operating pressures can be adjusted by increments of 0.1 bar via an intuitive XC2003 controller. The controller facilitates diagnostics, tracks the compressor’s utilisation and indicates planned service interventions.

The XATS 138 features a strong canopy and undercarriage to enable safe transportation. The bodywork is protected by a three-layer layer corrosion resistance system, including a Zincor, primer and a powder coating. It confirms to corrosion protection category C3, helping to keep the canopy corrosion free for up to 10 years. A spillage-free frame, which is fitted as a standard component, is guaranteed to contain all fluids.

Small footprint

The XATS 138 compressor has a small footprint and is mounted on a single axle to assist manoeuvrability and is powered by a 4-cylinder, Stage 3B compliant, Kubota engine. Additionally, it comes equipped with a DOC-DPF after-treatment exhaust system, which provides emission compliance. Operating parameters are -20 °C  to +45 °C.

Atlas Copco’s rotary screw element combined with a 49 kW Kubota diesel engine offers a portable compressor offers a fuel economy capable of achieving a 25% fuel saving at normal load. The normal effective working pressure range is 7-10.3 bar with a flow of 5.5-7.0 m3/min.

The XATS 138 provides extended service intervals, both for the compressor: 1000 hours or once every two years on average, and engine: 500 hours or once a year on average. Additional features, such as a spin-on air/oil separator, ensure that the service interventions are short and efficient. On a practical level, the dimensions of the U-Flex, pivot canopy provide greater access for service.