Related Stories

  • Optimal pumping schedule for hydraulic fracking
    The research paper 'Optimal pumping schedule design to achieve a uniform proppant concentration level in hydraulic fracturing' has been published in Elsevier journal Computers & Chemical Engineering.
  • Adjustment of pump operational regimes
    The article 'The Adjustment of Turbo-pumps’ Extreme Regimes by Means of Delivery Mounted Restriction Orifice Plates' has been published in Elsevier journal Energy Procedia.

Feature

3D numerical simulations of an external gear pump


World Pumps

The article 'Numerical simulation of three-dimensional external gear pump using immersed solid method' has been published in Elsevier journal Applied Thermal Engineering.

Abstract

External gear pumps are typically used as positive displacement machines that are capable of developing high pressures while operating at low suction pressures in hydraulic systems. Considerable attention has paid recently been given to investigating the flow characteristics and enhancing pump efficiency using theoretical, numerical, and experimental approaches. In this study, three-dimensional (3D) numerical simulations of an external gear pump were conducted to study the effects of 3D geometrical design parameters on pump performance characteristics such as the flow rate.

The characteristics of internal flow are also presented with respect to the internal pressure peak, local cavitation, and delivery pressure ripple. The immersed solid method (ISM) was used to simulate the operation of a gear pump under extreme conditions of high rotational speed. We found that the maximum flow rate of the gear pump is a strong function of the gear tip clearance and lateral clearance. Using the 3D model, the effect of the lateral clearance on flow rate is highlighted.

 
 

Share this article

More services

 

This article is featured in:
General Processing

 

Comment on this article

You must be registered and logged in to leave a comment about this article.