Share

Related Links

  • ITT Water
  • Elsevier Ltd is not responsible for the content of external websites.

Related Stories

  • Stormwater tank design – the Grundfos way
    Increasingly, cities and low-lying areas are at risk of sewer overflow from extreme rainfall. Stormwater tanks can help reduce the impact of extreme climatic events by holding back excess stormwater and contaminants. This protects the environment and makes possible the intelligent management of stormwater flows, resulting in savings on infrastructure investments. Now Grundfos has developed a handbook informing engineers about tank design and optimisation.
  • Tsurumi in wastewater upgrade at a Bulgarian military training base
    Japanese pump supplier Tsurumi has upgraded a European army base. This is part of an ongoing development to the site using a mix of aerators, agitators, cutters, decanters and sewage pumps.
  • Turning tallow oil into biodiesel fuel
    Faced with mounting fuel costs, one man and his wife decided to set up a biodiesel plant in their garage. From these small beginnings grew a fully fledged production facility. To ensure a smooth operation, Blackmer ProVane Pumps were chosen for their methanol recovery, high-speed truck loading and transfer rate applications.
  • Conference review: European Desalination Society Conference
    In May 2009 the spa town of Baden Baden, Germany, played host to the European Desalination Society’s Conference and Exhibition on Desalination for the Environment - Clean Water and Energy. Discussions focussed on the problems that many countries face in providing water for their populations, industries and agriculture. Bryan Orchard reports.
  • Nuclear power: Less resistance to energy efficiency
    There are many ways to increase the efficiency of pumps. Here, Lew Beck at Oconee Nuclear Station discusses two of them: firstly the use of ceramic type coatings applied to pump internals such as the impeller and casing, and secondly through the renewal of original fits and tolerances.

Top 5 Stories

News

High-head range is self-cleaning

07 January 2010

ITT Flygt has introduced two new high-head pumps incorporating self-cleaning N-technology.

The 3153 and 3171 pumps are suitable for low-flow wastewater applications.

The self-cleaning N-pump has a semi-open impeller as opposed to a channel impeller, which can become clogged. The N-pumps’ impeller has with a relief groove in the volute which Flygt says has been proven to reduce the risk of clogging and maintain pumping efficiency. This can also result in lower overall energy consumption, which reduces the lifetime cost of a pumping operation.

The 3153 and 3171 pumps have a maximum discharge head of about 90 m (300 ft).

 

This article is featured in:
Life Cycle Cost & Energy Efficiency  •  Water and Wastewater

 

Comment on this article

You must be registered and logged in to leave a comment about this article.