A Vesconite Hilube polymer bearing has replaced the lower bearing on an Archimedes screw, part of an ongoing maintenance project for the pump at the Hammanskraal drinking water project in Tshwane, South Africa.
The bearing has a 202 mm inner diameter, a 300 mm outer diameter and is 407 mm long. The bottom bearing shaft with the hub and base plate weigh 723 kg.
Vesconite Hilube was chosen because the application is submerged, and Vesconite Hilube does not swell in water. It was also specified in this potable water application since self-lubricating Vesconite Hilube does not require grease, which can be hazardous to human health if consumed, and it is certified for potable water and food contact applications.
Chris Fourie, of Atlas Lifting Equipment, carried out the maintenance on the Archimedes screw between December 2020 and January 2021. Fourie tends to use phosphor brass or greased eco-bearings for raw sewerage Archimedes screw applications, but specifies Vesconite Hilube for potable water applications. He will continue to use Vesconite Hilube for the Hammanskraal lower bearings, and envisages that replacement will take place every two years.
