The Singer Model 106-SPI-MV can be utilized with the metering valve as a standalone option or built into a 106-2SC-PCO pilot system to provide complete flow-based valve control.
The SPI-MV has been flow profiled and tested in McCrometer NIST traceable flow laboratory and is guaranteed accurate to the 2% of reading throughout the specified velocity range. As it has already been profiled to match the Singer valve it works right out of the box.
The insertion probe extends into the flow stream, in one of the valve inlet connections and protrudes into the valve, equivalent to 1/8 of the valve diameter size. The bullet nose profile, eliminates clogging or build up and as a single piece design with no moving parts, the SPI-MV sensor contains nothing to wear or break.
The unit can be installed on any of the Singer Valve models from 4 in (100 mm) to 36 in (900 mm) valve sizes. It can be installed on either side of the valve on the inlet connection and only requires three pipe diameters upstream clearance.
Singer will be showing this product at ACE 13 in Denver, booth number #4052
