Express II remote monitoring system easily integrates with water and wastewater equipment

1 min read

The Sensaphone Express II remote monitoring system easily integrates with existing floats, pump alarm outputs and level transducers to let water facility operators mind the status of pumps, tank levels, indoor and outdoor temperature, humidity levels, ventilation, carbon dioxide, power failure and more.

The Express II is on the job 24/7 and notifies designated users of changes in conditions, whether they are on site or away from the facility. When the Express II system detects that a sensor reading has moved out of the pre-set range, it immediately alerts up to 48 people with custom phone calls, allowing personnel to quickly address the situation.

Another key feature of the Express II system is its expandability of up to 40 total inputs and up to 16 output zones. Increasing monitoring capability is simple with easy-to-install expansion input and output cards. This makes it ideal for large water and wastewater facilities that require many monitoring points or operations that are planning future growth.

Housed in a NEMA-4X enclosure, the Express II is protected from dust, dirt and moisture both indoors and out. The LCD display shows continuous input status and assists with keypad programming for simple and easy setup. The internal rechargeable battery backup provides 12 hours of continuous monitoring and alerts in the event of a power outage.