The new AF/Armaflex Class O brand thermal insulation, incorporating a full range of elastomeric tubes, self seal tubes, coils, tape, flat sheet, self-adhesive sheets, continuous sheet (rolls) and pre-insulated pipe supports is now available with all the products providing the same technical values for the first time.
The new range from technical insulation manufacturer Armacell is suitable for refrigeration and air conditioning, chilled water, process lines and heating and ventilation pipe and ductwork applications, with products available from this month. These replace the previous Class O Armaflex range, with the new AF/Armaflex Class O tube and sheet product codes now prefixed with AF-CO for ease of identification.
Since advanced insulation manufacturer Armacell first developed Armaflex flexible nitrile rubber foam range in the 1950s it has grown to be the most recognised technical thermal insulation brand in the world for cold process applications. The Class O Armaflex brand was developed at Armacell’s Oldham plant in the 1960s and was the first flexible insulation to meet the UK fire standards.
The Construction Products Regulation introduced in 2013 now means it is mandatory for Armaflex and other thermal insulation products to carry a CE Mark. The legislation sets out a harmonised European standard (hEN) for declaring the technical values of flexible elastomeric foams and new testing procedures to determine the stated performance. The obligatory technical values, as set out in the harmonised standard, must be stated by the manufacturer in a Declaration of Performance (DoP) certificate.
A new improved formulation of Armaflex has therefore been developed to meet these obligatory European fire performance, thermal conductivity and water vapour diffusion resistance values. This new advanced formula AF/Armaflex Class O range manufactured in the UK has a Euroclass Fire Rating of Bs3-d0 (the European equivalent to a Class O rating) and improved thermal conductivity performance of 0.033 W/(m • K) at 0ºC.
The water vapour diffusion resistance performance is also improved from 7,000 to µ ≥ 10,000. In addition the product is now free from medium chain chlorinated paraffins (MCCP) which construction product agencies in Sweden and Norway have ruled against because of the threat they have been found to pose to marine wildlife.