Three new N-Eupex couplings and optimised flexible elements

1 min read

Flender is expanding the portfolio of its flexible coupling series N-Eupex by introducing three new types. The new products allow users additional flexibility in their systems without losing the compact design and high load capacity of a pin coupling.

The new N-Eupex ERN is equipped with a torque limiter, which provides even more
security in the drivetrain in many applications. The coupling variant allows users to
specify a maximum torque so that critical torques for the motor and output machine
are not transmitted. Machines and systems are protected from overload and
damage, thus significantly increasing system availability.

With the N-Eupex B plus clamping element, Flender introduces a second new
coupling that ensures frictionally engaged clamping connections. In this case, the
plain, cylindrical machine shaft end is connected to the coupling hub via a clamping
connection without a feather key and service ability is increased. For example,
assembly or replacement of worn elastomers can be carried out much more easily.

No connecting machine components must be moved, the time required is halved
and so is the downtime of the machine.

With the N-Eupex DKS, a new double-cardanic coupling is introduced as a "short
version" into Flender’s modular system. While the DK type, which was launched in
2020, addresses the pump market with standard expansion pieces for normed shaft
distances, the DKS is the shortest possible double-cardanic solution for the market.
The shortened overall length enables cost-optimized use with a small shaft distance
dimension without losing the advantages of a double-cardanic coupling connection.

New elastomers for the pin couplings round off the modular extensions. In addition
to the previously used rubber elements made of NBR, Flender now also offers
elastomers made of thermoplastic polyurethane (TPU). Following the torque
increase for all N-Eupex couplings with NBR packings in 2020, the use of TPU
packings allows the power density to be increased by another 20 percent on
average. For sizes 300 and above, the familiar NBR elastomer is combined with
fabric inserts and the torque capacity is again raised.

"With a view to the long tradition of cam couplings, our development engineers are
systematically working on increasing the variety of combinations even further. The
2022 enhancements give our users a wide range of sustainable options for
optimizing their machines and systems even more and reducing maintenance,"
explains André Artmann, Head of Coupling Sales.